ARCHIVED - NEB SA 2005-01 Faulty Equipment
This page has been archived on the Web
Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.
3 March 2005
To: All companies under National Energy Board jurisdiction,
Canadian Energy Pipeline Association,
Canadian Association of Petroleum Producers, and
Subject: National Energy Board Safety Advisory
NEB SA 2005-01
Attached is a safety advisory regarding the hazards associated with the use of faulty tools and equipment. The Board expects that this advisory be given wide circulation to personnel involved in construction, maintenance and pipeline operation within your organization.
If you have questions concerning this initiative, please call Karen Duckworth (email@example.com) at 403-299-3669.
Michel L. Mantha
NEB SA 2005-01
The fuel line of a jumping jack caught fire while it was being used to compact clay around a piping manifold at an oil transmission facility.
Both the fuel line and the electrical wiring on the jumping jack were burnt. It is suspected that electrical wiring for a stop button may have either broken and punctured the adjacent fuel line or may have overheated and burned through the fuel line. The stop button was not functional and the equipment had not been removed from service. The workers were using the fuel shut-off to shut down the machine. In reality, the defective equipment should have been removed from site.
This incident did not result in injuries to workers; however, there is a potential for harm to workers and to property.
Cause of the Incident
The cause of this incident was the use of defective equipment. Though it is unknown what motivated the workers to use the equipment with the stop button malfunctioning, it could be suggested that it is fairly common for people to "make do" with the minor nuisances of a broken shut off button if they could shut the equipment down using another means.
Supervisors and management need to emphasize that defective equipment, no matter how trivial the defect seems, needs to be removed from site for immediate replacement and/or repair.
For further information regarding this advisory please contact the National Energy Board at 403-292-4800 and ask for assistance from staff in Operations Compliance.
- Date modified: